Difficulty
Moderate
Steps
2
Time Required
15 - 20 minutes
Sections
- Back Panel
- 1 step
- Audio Jack
- 1 step
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
BackDell XPS 17 9710
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before using this guide, check that there isn’t any debris in your audio port. If there is, turn off the device completely, and use compressed air to clean it out.
Before beginning, make sure to completely power off the device.
What you need
Step 1
Back Panel
- Remove eight 5 mm screws from the back panel using a T5 Torx screwdriver.
- Use the opening tool to loosen the panel on all sides and then lift it from the device.
Remove eight 5 mm screws from the back panel using a T5 Torx screwdriver.
Use the opening tool to loosen the panel on all sides and then lift it from the device.
1024
Step 2
Audio Jack
- Remove three 3 mm screws that hold the audio jack in place using a JIS #1 screwdriver.
- Remove the audio jack from the laptop.
Remove three 3 mm screws that hold the audio jack in place using a JIS #1 screwdriver.
Remove the audio jack from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Matthew McKeown
Member since: 03/28/2022
257 Reputation
2 Guides authored
Badges:
3
Team
UMass Dartmouth, Team 1-2, Mellen Spring 2022
Member of UMass Dartmouth, Team 1-2, Mellen Spring 2022
UMASSD-MELLEN-S22S1G2
3 Members
5 Guides authored
