Dell Xps 15 L502X Ram Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

2

• Back Panel
• 2 steps
• RAM
• 3 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackDell XPS 15 (L501X/L502X)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Remove the black battery bar from the computer before continuing any further operations.
• Unscrew the three 5mm Phillps #2 screws on the left side of the back panel.

Remove the black battery bar from the computer before continuing any further operations.

Unscrew the three 5mm Phillps #2 screws on the left side of the back panel.

1024

Step 2

• Lift up the left side of the panel.
• There are three tabs holding in the right side of the panel. Pull the panel up and away from these tabs to remove it.

Lift up the left side of the panel.

There are three tabs holding in the right side of the panel. Pull the panel up and away from these tabs to remove it.

Step 3

              RAM               

• Locate both of the RAM slots right behind the back panel.

Locate both of the RAM slots right behind the back panel.

Step 4

• Use a black spudger to press the clips holding the RAM outward. You should hear a “click” sound.
• Once both clips have been released, the RAM will be released at a 45 degree angle.

Use a black spudger to press the clips holding the RAM outward. You should hear a “click” sound.

Once both clips have been released, the RAM will be released at a 45 degree angle.

Step 5

• Carefully grab the RAM with both hands and pull outward.
• Repeat steps 4 & 5 to remove the second RAM.
• Both RAMs should come out without much force. Do not attempt to pull the RAM out with force as this could damage the fixture holding the RAM.

Carefully grab the RAM with both hands and pull outward.

Repeat steps 4 & 5 to remove the second RAM.

Both RAMs should come out without much force. Do not attempt to pull the RAM out with force as this could damage the fixture holding the RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Vishal                     

Member since: 09/21/2015

766 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       IUPUI, Team 2-3, Baechle Fall 2015                        

                                                  Member of IUPUI, Team 2-3, Baechle Fall 2015 



                    IUPUI-BAECHLE-F15S2G3                     


                                            3 Members                     


                                            8 Guides authored