Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Base Cover
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell XPS 15 9570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Prior to starting this guide, be sure the laptop is powered off and it is unplugged from the charging cord.
What you need
Step 1
Base Cover
- Make sure your device is powered off and unplugged before starting
- Flip the device over so the base cover of the computer is facing upwards.
Make sure your device is powered off and unplugged before starting
Flip the device over so the base cover of the computer is facing upwards.
1024
Step 2
- Using a Torx T5 screwdriver, remove the ten 3 mm screws on the back.
Using a Torx T5 screwdriver, remove the ten 3 mm screws on the back.
Step 3
- Flip open the system badge and with a Phillips #00, remove the two 8.5 mm screws.
Flip open the system badge and with a Phillips #00, remove the two 8.5 mm screws.
Step 4
- Lift the back cover off of the device.
Lift the back cover off of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Margaret Combs
Member since: 09/08/2021
429 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
University of Alabama, Team 2-4, Bedsole Fall 2021
Member of University of Alabama, Team 2-4, Bedsole Fall 2021
UA-BEDSOLE-F21S2G4
3 Members
11 Guides authored