Difficulty
Easy
Steps
4
Time Required
3 - 4 minutes
Sections
2
- Base Cover
- 3 steps
- WiFi Card
- 1 step
Flags
0
BackDell XPS 15 9530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Cover
- Using a T5 Torx screwdriver, remove ten 3mm screws.
Using a T5 Torx screwdriver, remove ten 3mm screws.
1024
Step 2
- Lift the plastic tab.
- Remove two 3mm Phillips #0 screws under the plastic tab.
Lift the plastic tab.
Remove two 3mm Phillips #0 screws under the plastic tab.
Step 3
- Lift the lower case off.
Lift the lower case off.
Step 4
WiFi Card
- Use a Phillips #0 screwdriver to remove the screw holding the WiFi card down. Be careful not to lose the metal retainer holding the antenna cables down.
- Without applying too much force, pop out the antenna cables and remove the card.
- Insert the new card, and reattach the antenna cables. The black cable connects to the main antenna slot (marked with a solid triangle) and the white connects to the auxiliary (marked with an empty triangle).
Use a Phillips #0 screwdriver to remove the screw holding the WiFi card down. Be careful not to lose the metal retainer holding the antenna cables down.
Without applying too much force, pop out the antenna cables and remove the card.
Insert the new card, and reattach the antenna cables. The black cable connects to the main antenna slot (marked with a solid triangle) and the white connects to the auxiliary (marked with an empty triangle).
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Matt
Member since: 10/02/2019
171 Reputation
2 Guides authored
Badges:
3
Team
The Citadel Military College of South Carolina, Team S2-G7, Eggleston Fall 2019
Member of The Citadel Military College of South Carolina, Team S2-G7, Eggleston Fall 2019
CMCSC-EGGLESTON-F19S2G7
2 Members
5 Guides authored