Difficulty
Easy
Steps
6
Time Required
20 - 25 minutes
Sections
2
- Battery
- 3 steps
- Touch Pad
- 3 steps
Flags
0
BackDell XPS 15 9530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using a Phillips #0 screwdriver, remove the seven 3.5mm screws that secure the battery to the palm rest assembly.
Using a Phillips #0 screwdriver, remove the seven 3.5mm screws that secure the battery to the palm rest assembly.
1024
Step 2
- Disconnect the battery cable from the system board.
- Be sure to use a plastic tool, not a metal one.
Disconnect the battery cable from the system board.
Be sure to use a plastic tool, not a metal one.
Step 3
- Lift the battery off the chassis.
Lift the battery off the chassis.
Step 4
Touch Pad
- Remove the touch pad ribbon cable by lifting the small plastic flap and pulling ribbon straight out of the connector.
Remove the touch pad ribbon cable by lifting the small plastic flap and pulling ribbon straight out of the connector.
Step 5
- Using a Phillips #0 screwdriver, remove the four 3mm screws holding in the touchpad assembly.
Using a Phillips #0 screwdriver, remove the four 3mm screws holding in the touchpad assembly.
Step 6
- Lift the bottom of the touchpad and pull directly out.
Lift the bottom of the touchpad and pull directly out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Larissa Omura
Member since: 04/04/2019
743 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Oregon Institute of Technology, Team S1-G3, Lancaster Spring 2019
Member of Oregon Institute of Technology, Team S1-G3, Lancaster Spring 2019
OIT-LANCASTER-S19S1G3
3 Members
11 Guides authored
