Difficulty
Easy
Steps
6
Time Required
15 minutes
Sections
2
- Base Cover
- 3 steps
- SSD
- 3 steps
Flags
0
BackDell XPS 15 9530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Cover
- Using a T5 Torx screwdriver, remove ten 3mm screws.
Using a T5 Torx screwdriver, remove ten 3mm screws.
1024
Step 2
- Lift the plastic tab.
- Remove two 3mm Phillips #0 screws under the plastic tab.
Lift the plastic tab.
Remove two 3mm Phillips #0 screws under the plastic tab.
Step 3
- Lift the lower case off.
Lift the lower case off.
Step 4
SSD
- Pull lift tabs and remove the plastic that covers the hard drive to expose the hard drive.
Pull lift tabs and remove the plastic that covers the hard drive to expose the hard drive.
Step 5
- Using a Phillips #0 screwdriver, remove two 2.5mm screws that secure the SSD to the chassis.
Using a Phillips #0 screwdriver, remove two 2.5mm screws that secure the SSD to the chassis.
Step 6
- Pull the SSD out parallel to the mainboard.
Pull the SSD out parallel to the mainboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Larissa Omura
Member since: 04/04/2019
743 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Oregon Institute of Technology, Team S1-G3, Lancaster Spring 2019
Member of Oregon Institute of Technology, Team S1-G3, Lancaster Spring 2019
OIT-LANCASTER-S19S1G3
3 Members
11 Guides authored
