Difficulty
Easy
Steps
5
Time Required
2 - 8 minutes
Sections
3
- Base-Cover Assembly
- 2 steps
- Battery
- 1 step
- Memory Module
- 2 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell XPS 15 9530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unscrewing the Base-Cover Assembly
- After turning off the system, unscrew the 12 Philips screws (#1) that are on the bottom of the laptop.
- Don’t forget to unscrew the two screws hidden under the system badge!
After turning off the system, unscrew the 12 Philips screws (#1) that are on the bottom of the laptop.
Don’t forget to unscrew the two screws hidden under the system badge!
1024
Step 2
Prying Off the Base-Cover Assembly
- Using a spudger or some other prying tool (#1), pry off the base-cover assembly from the rest of the system.
Using a spudger or some other prying tool (#1), pry off the base-cover assembly from the rest of the system.
Step 3
Remove Battery
- Remove the screws that secure the battery to the palm-rest assembly.
- Disconnect the battery cable from the system board.
- Lift the battery off the palm-rest assembly.
- After you remove the battery, turn the computer over, open the display, and press the power button for about five seconds to ground the system board.
Remove the screws that secure the battery to the palm-rest assembly.
Disconnect the battery cable from the system board.
Lift the battery off the palm-rest assembly.
After you remove the battery, turn the computer over, open the display, and press the power button for about five seconds to ground the system board.
Step 4
Remove Memory
- Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module connector until the memory module pops up.
- Remove the memory module from the memory-module connector.
Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module connector until the memory module pops up.
Remove the memory module from the memory-module connector.
Step 5
Add New Memory Module
- Align the notch on the New memory module with the tab on the memory-module connector.
- Slide the memory module firmly into the connector at a 45-degree angle and press the memory module down until it clicks into place.
- NOTE: If you do not hear the click, remove the memory module and reinstall it.
Align the notch on the New memory module with the tab on the memory-module connector.
Slide the memory module firmly into the connector at a 45-degree angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
To reassemble your device, put the battery back in and reaffix the base-cover assembly to the system.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Johnathan Hammond
Member since: 02/28/2018
44,151 Reputation
408 Guides authored
Badges:
24
+21 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored