Difficulty

Easy

Steps

3

Time Required

                          3 - 6 minutes            

Sections

2

  • Base-Cover Assembly
  • 2 steps
  • Battery
  • 1 step

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell XPS 15 9530

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unscrewing the Base-Cover Assembly               
  • After turning off the system, unscrew the 12 Philips screws (#1) that are on the bottom of the laptop.
  • Don’t forget to unscrew the two screws hidden under the system badge!

After turning off the system, unscrew the 12 Philips screws (#1) that are on the bottom of the laptop.

Don’t forget to unscrew the two screws hidden under the system badge!

1024

Step 2

              Prying Off the Base-Cover Assembly               
  • Using a spudger or some other prying tool (#1), pry off the base-cover assembly from the rest of the system.

Using a spudger or some other prying tool (#1), pry off the base-cover assembly from the rest of the system.

Step 3

              Remove Battery               
  • Remove the screws that secure the battery to the palm-rest assembly.
  • Disconnect the battery cable from the system board.
  • Lift the battery off the palm-rest assembly.
  • After you remove the battery, turn the computer over, open the display, and press the power button for about five seconds to ground the system board.

Remove the screws that secure the battery to the palm-rest assembly.

Disconnect the battery cable from the system board.

Lift the battery off the palm-rest assembly.

After you remove the battery, turn the computer over, open the display, and press the power button for about five seconds to ground the system board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Johnathan Hammond                     

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored