Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Rear Panel
  • 3 steps
  • Display Assembly
  • 3 steps

Flags

3

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackDell XPS 15 9510

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Rear Panel
  • Make sure the laptop is powered off and unplug all cables before beginning any repair.
  • Remove eight 3 mm screws from the underside of the case using a T5 Torx screwdriver.

Make sure the laptop is powered off and unplug all cables before beginning any repair.

Remove eight 3 mm screws from the underside of the case using a T5 Torx screwdriver.

1024

Step 2

  • The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.
  • Wedge the case apart with a nylon spudger.
  • If the plastic one isn’t possible to insert, use the metal spudger to carefully create a small gap first.
  • Once the spudger is inserted, slide it along each side of the laptop

The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.

Wedge the case apart with a nylon spudger.

If the plastic one isn’t possible to insert, use the metal spudger to carefully create a small gap first.

Once the spudger is inserted, slide it along each side of the laptop

Step 3

  • The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.
  • Lift the back panel of the laptop off and set it aside.

Lift the back panel of the laptop off and set it aside.

Step 4

              Display Assembly
  • Remove the four screws (eight total) from each display hinge using a Phillips #00 screwdriver.

Remove the four screws (eight total) from each display hinge using a Phillips #00 screwdriver.

Step 5

  • Remove three screws that connect the display using a Phillips #00 screwdriver.

Remove three screws that connect the display using a Phillips #00 screwdriver.

Step 6

  • Carefully remove the display from the Dell XPS 15 9510.

Carefully remove the display from the Dell XPS 15 9510.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Austin Sa

Member since: 03/30/2022

402 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 1-3, Mellen Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-3, Mellen Spring 2022 



                    UMASSD-MELLEN-S22S1G3                     


                                            3 Members                     


                                            5 Guides authored