Dell Xps 15 9510 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          20 minutes - 1 hour            

Sections

2

• Rear Panel
• 3 steps
• Battery
• 3 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackDell XPS 15 9510

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

If the battery you are replacing is swollen, be sure to take appropriate precautions.

What you need

Step 1

              Rear Panel               

• Make sure the laptop is powered off and unplug all cables before beginning any repair.
• Remove eight 3 mm screws from the underside of the case using a T5 Torx screwdriver.

Make sure the laptop is powered off and unplug all cables before beginning any repair.

Remove eight 3 mm screws from the underside of the case using a T5 Torx screwdriver.

1024

Step 2

• The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.
• Wedge the case apart with a nylon spudger.
• If the plastic one isn’t possible to insert, use the metal spudger to carefully create a small gap first.
• Once the spudger is inserted, slide it along each side of the laptop

The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.

Wedge the case apart with a nylon spudger.

If the plastic one isn’t possible to insert, use the metal spudger to carefully create a small gap first.

Once the spudger is inserted, slide it along each side of the laptop

Step 3

• The metal case of the XPS 15 9510 is extremely sharp, so be careful not to run your fingers along the edge when disassembling the laptop.
• Lift the back panel of the laptop off and set it aside.

Lift the back panel of the laptop off and set it aside.

Step 4

              Battery               

• Using the small battery pull tab, disconnect the battery connector from the motherboard.

Using the small battery pull tab, disconnect the battery connector from the motherboard.

Step 5

• Remove eight 2.5 mm from around the perimeter of the battery using a Phillips #0 screwdriver.

Remove eight 2.5 mm from around the perimeter of the battery using a Phillips #0 screwdriver.

Step 6

• There are many delicate components in the vicinity of the battery, so be extremely careful removing it
• Remove the old battery from the laptop.

There are many delicate components in the vicinity of the battery, so be extremely careful removing it

Remove the old battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Joseph Remondi                     

Member since: 03/30/2022

248 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team 1-3, Mellen Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-3, Mellen Spring 2022 



                    UMASSD-MELLEN-S22S1G3                     


                                            3 Members                     


                                            5 Guides authored