Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
2
- Back Panel
- 2 steps
- RAM
- 3 steps
Flags
0
BackDell XPS 14Z L412Z
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the back cover of the laptop by unscrewing eight 3.5mm screws using a Phillips #0 screwdriver.
Remove the back cover of the laptop by unscrewing eight 3.5mm screws using a Phillips #0 screwdriver.
1024
Step 2
- Using the plastic opening tool, pry up the back cover.
- It is recommended to start from a corner and run the tool along the edge of the cover.
Using the plastic opening tool, pry up the back cover.
It is recommended to start from a corner and run the tool along the edge of the cover.
Step 3
RAM
- Locate the RAM on the motherboard.
Locate the RAM on the motherboard.
Step 4
- Carefully pull on the tabs on either sides of the RAM.
Carefully pull on the tabs on either sides of the RAM.
Step 5
- Carefully pull the old RAM out.
Carefully pull the old RAM out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Colton Niewolny
Member since: 02/15/2018
411 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
UW Stout, Team S8-G3, Ogden Spring 2018
Member of UW Stout, Team S8-G3, Ogden Spring 2018
UWSTOUT-OGDEN-S18S8G3
4 Members
6 Guides authored
