Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes            

Sections

2

  • Back Panel
  • 2 steps
  • Hard Drive
  • 3 steps

Flags

0

  • BackDell XPS 14Z L412Z

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel               
  • Remove the back cover of the laptop by unscrewing eight 3.5mm screws using a Phillips #0 screwdriver.

Remove the back cover of the laptop by unscrewing eight 3.5mm screws using a Phillips #0 screwdriver.

1024

Step 2

  • Using the plastic opening tool, pry up the back cover.
  • It is recommended to start from a corner and run the tool along the edge of the cover.

Using the plastic opening tool, pry up the back cover.

It is recommended to start from a corner and run the tool along the edge of the cover.

Step 3

              Hard Drive               
  • Locate the hard drive on the bottom right corner.
  • Unscrew the three 3.5mm screws with the Phillips #0 screwdriver.

Locate the hard drive on the bottom right corner.

Unscrew the three 3.5mm screws with the Phillips #0 screwdriver.

Step 4

  • Remove the four additional 3.5mm screws using the Phillips #0 screwdriver.

Remove the four additional 3.5mm screws using the Phillips #0 screwdriver.

Step 5

  • Carefully pull and remove the old hard drive.

Carefully pull and remove the old hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Colton Niewolny                     

Member since: 02/15/2018

411 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UW Stout, Team S8-G3, Ogden Spring 2018                        

                                                  Member of UW Stout, Team S8-G3, Ogden Spring 2018 



                    UWSTOUT-OGDEN-S18S8G3                     


                                            4 Members                     


                                            6 Guides authored                     

dude - Dec 19, 2022

Reply

On my laptop there was a small curved metal bracket that sat in the very corner of the PC covering one corner of the hard drive. That had to be removed by loosening a screw and gently prying the bar out before the hard drive could be removed.