Difficulty
Easy
Steps
2
Time Required
5 - 10 minutes
Sections
- Base Plate
- 1 step
- Battery
- 1 step
Flags
3
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell XPS 13 L322X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Plate
- Shut down and unplug the device before beginning.
- Use a Torx T5 screwdriver to remove the 10 screws from the computer’s base plate.
- Use a prying tool or a fingernail to lift up and remove the base cover.
Shut down and unplug the device before beginning.
Use a Torx T5 screwdriver to remove the 10 screws from the computer’s base plate.
Use a prying tool or a fingernail to lift up and remove the base cover.
1024
Step 2
Battery
- Use a Phillips #0 screwdriver to remove all of the screws securing the battery.
- Use a spudger to lift the edge of the battery, then carefully remove it.
Use a Phillips #0 screwdriver to remove all of the screws securing the battery.
Use a spudger to lift the edge of the battery, then carefully remove it.
To reassemble your device, after the new battery has been put in place, screw all 10 screws back on the base cover.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Johnathan Hammond
Member since: 02/28/2018
44,151 Reputation
408 Guides authored
Badges:
24
+21 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
