Difficulty
Moderate
Steps
6
Time Required
25 - 35 minutes
Sections
1
- Track Pad
- 6 steps
Flags
0
BackDell XPS 13 L321X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Track Pad
- Remove ten 3mm screws from the back cover with a T4 screwdriver.
Remove ten 3mm screws from the back cover with a T4 screwdriver.
1024
Step 2
- Disconnect the ribbon cable with a plastic iFixit opening tool, by lifting up the black clip and by pulling the white ribbon off.
- Pull aside the ribbon cable.
Disconnect the ribbon cable with a plastic iFixit opening tool, by lifting up the black clip and by pulling the white ribbon off.
Pull aside the ribbon cable.
Step 3
- With a plastic iFixit opeing tool, insert it in between and remove the battery cable.
With a plastic iFixit opeing tool, insert it in between and remove the battery cable.
Step 4
- Use a PH00 size screwdriver to remove the 8 screws that secure the battery.
- Six 3mm screws.
- Two 5mm screws.
- Lift the battery out.
Use a PH00 size screwdriver to remove the 8 screws that secure the battery.
Six 3mm screws.
Two 5mm screws.
Lift the battery out.
Step 5
- Disconnect the ribbon cable with a plastic iFixit opening tool by lifting up the black clip and by pulling the white ribbon.
- Place aside.
Disconnect the ribbon cable with a plastic iFixit opening tool by lifting up the black clip and by pulling the white ribbon.
Place aside.
Step 6
- Remove four 2mm screws with a PH00 screwdriver.
- Remove the mouse pad.
Remove four 2mm screws with a PH00 screwdriver.
Remove the mouse pad.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Ahmad EL Herbawi
Member since: 03/01/2017
499 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team S6-G3, Lacy Spring 2017
Member of USF Tampa, Team S6-G3, Lacy Spring 2017
USFT-LACY-S17S6G3
4 Members
5 Guides authored
