Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackDell XPS 13 9370
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Prepare your device
- Save and close all open files and exit all open applications.
- Shut down your computer. Click Start > Power > Shut down.
- Disconnect your computer and all attached devices from their electrical outlets.
- Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
- Remove any media card and optical disc from your computer, if applicable.
Save and close all open files and exit all open applications.
Shut down your computer. Click Start > Power > Shut down.
Disconnect your computer and all attached devices from their electrical outlets.
Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
Remove any media card and optical disc from your computer, if applicable.
1024
Step 2
Remove the base cover screws
- Remove the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly.
Remove the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly.
Step 3
Remove the base cover
- With the computer face-down, open the computer at an angle.
- Using a plastic scribe (spudger), pry the base cover from the palm-rest assembly.
- Moving the base cover from left to right, release the clips securing the base cover to the palm-rest assembly.
- Lift the base cover from the palm-rest assembly.
With the computer face-down, open the computer at an angle.
Using a plastic scribe (spudger), pry the base cover from the palm-rest assembly.
Moving the base cover from left to right, release the clips securing the base cover to the palm-rest assembly.
Lift the base cover from the palm-rest assembly.
Step 4
Disconnect battery cable
- Disconnect the battery cable from the system board.
Disconnect the battery cable from the system board.
Step 5
Remove the battery
- Remove the four screws (M2x2) that secure the battery to the palm-rest assembly.
- Remove the screw (M1.6x4) that secures the battery to the palm-rest assembly.
- Lift the battery off the palm-rest assembly.
- Turn the computer over, open the display, and press the power button for about 5 seconds to ground the computer.
Remove the four screws (M2x2) that secure the battery to the palm-rest assembly.
Remove the screw (M1.6x4) that secures the battery to the palm-rest assembly.
Lift the battery off the palm-rest assembly.
Turn the computer over, open the display, and press the power button for about 5 seconds to ground the computer.
To replace the battery & reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 1 other contributor
Max Kletskov
Member since: 04/22/2020
37,916 Reputation
15 Guides authored
Badges:
19
+16 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored
mnyousafva - Aug 10, 2022
Reply
Is the battery an original dell battery?
Noah Guirguis - Nov 20, 2022
Reply
Why doesn’t it say what tools are needed?
Jeff Doremus - Jan 13, 2023
Reply
Excellent guide. Took me about 25 minutes. Works perfectly.
