Dell Xps 13 9365 2 In 1 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          6 - 20 minutes            

Sections

1

• Battery
• 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell XPS 13 9365 2-in-1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

For your safety, discharge your battery as much as possible before disassembling your device. This can be done by disconnecting the AC adapter and allowing the battery to drain. Draining the battery reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

What you need

Step 1

              Battery               

• Use a Torx T4 screwdriver to remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly.

Use a Torx T4 screwdriver to remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly.

1024

Step 2

• Use your fingertips to lift the system badge open and reveal the single case screw.
• Use a Phillips #000 screwdriver to remove the screw (M1.6x4) that secures the base cover to the palm-rest assembly.

Use your fingertips to lift the system badge open and reveal the single case screw.

Use a Phillips #000 screwdriver to remove the screw (M1.6x4) that secures the base cover to the palm-rest assembly.

Step 3

• Starting from the front corner of the computer, pry up the base cover using a spudger and lift the base cover off the palm-rest assembly.

Starting from the front corner of the computer, pry up the base cover using a spudger and lift the base cover off the palm-rest assembly.

Step 4

• Disconnect the battery cable from the system board.

Disconnect the battery cable from the system board.

Step 5

• Use a Phillips #000 screwdriver to remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

Use a Phillips #000 screwdriver to remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

Step 6

• Use a Phillips #000 screwdriver to remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

Use a Phillips #000 screwdriver to remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

Step 7

• Lift the battery off the palm-rest assembly.

Lift the battery off the palm-rest assembly.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

                                                                                      12 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Johnathan Hammond                     

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored