Difficulty

Moderate

Steps

8

Time Required

                          15 - 30 minutes

Sections

3

  • Lower Case
  • 5 steps
  • Battery Disconnect
  • 1 step
  • Battery
  • 2 steps

Flags

0

  • BackDell XPS 13 9310

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

For your safety, discharge the battery below 25% before disassembling your device. This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

What you need

Step 1

              Unfasten the lower case
  • Use a T5 Torx screwdriver to remove the eight 3.3 mm screws securing the case.

Use a T5 Torx screwdriver to remove the eight 3.3 mm screws securing the case.

1024

Step 2

              Insert an opening pick
  • Insert an opening pick between the lower case and the chassis on the front right edge.

Insert an opening pick between the lower case and the chassis on the front right edge.

Step 3

              Release the case's front clips
  • Slide the pick along the front edge to release the clips securing the lower case.

Slide the pick along the front edge to release the clips securing the lower case.

Step 4

              Release the remaining clips
  • Continue sliding the opening pick along the perimeter of the lower case to release the remaining clips.

Continue sliding the opening pick along the perimeter of the lower case to release the remaining clips.

Step 5

  • Lift the lower case from the chassis and remove it.
  • During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.

Lift the lower case from the chassis and remove it.

During reassembly, this is a good point to power on your laptop and test all functions before sealing it up. Be sure to power your laptop back down before you continue working.

Step 6

              Disconnect the battery
  • Grip the pull tab on the battery connector with your fingers and gently pull away from the socket to disconnect it.

Grip the pull tab on the battery connector with your fingers and gently pull away from the socket to disconnect it.

Step 7

              Unfasten the battery
  • Use a Phillips screwdriver to remove the five 2.8 mm-long screws securing the battery.

Use a Phillips screwdriver to remove the five 2.8 mm-long screws securing the battery.

Step 8

              Remove the battery
  • Lift the battery straight out of its recess and remove it.

Lift the battery straight out of its recess and remove it.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, calibrate your newly installed battery after completing this guide.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

Author

                    Alex Diaz-Kokaisl

Member since: 01/16/2022

58,262 Reputation

                                      300 Guides authored                  



                       Badges:
                       30







                                                        +27 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored