Difficulty
Moderate
Steps
2
Time Required
5 - 10 minutes
Sections
- Battery
- 1 step
- mSATA Card
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell XPS 12 9Q33
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removing the Battery
- Slide the battery cable connector out of its system board socket.
- Pull parallel to the motherboard, not straight up, or you will damage the socket.
- Remove the screws that secure the battery to the palm-rest assembly.
- Lift and remove the battery along with its cable.
- Slide and hold the power switch for about five seconds to ground the system board.
Slide the battery cable connector out of its system board socket.
Pull parallel to the motherboard, not straight up, or you will damage the socket.
Remove the screws that secure the battery to the palm-rest assembly.
Lift and remove the battery along with its cable.
Slide and hold the power switch for about five seconds to ground the system board.
1024
Step 2
Removing the mSATA card
- Remove the screw that secures the mSATA card to the system board.
- Slide and remove the mSATA card out of the mSATA-card connector.
- If this is all you are doing Follow Step In Reverse if not Go to Next Step.
Remove the screw that secures the mSATA card to the system board.
Slide and remove the mSATA card out of the mSATA-card connector.
If this is all you are doing Follow Step In Reverse if not Go to Next Step.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Johnathan Hammond
Member since: 02/28/2018
44,151 Reputation
408 Guides authored
Badges:
24
+21 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
