Difficulty
Easy
Steps
2
Time Required
10 minutes
Sections
1
- Front and Rear Camera
- 2 steps
Flags
0
BackDell XPS 10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front and Rear Camera
- Unscrew the two screws shown circled in red in the picture.
- Use a #0 Phillips screwdriver to remove the two 4 mm screws
- Lift up the plug that connects the camera to the motherboard using the plastic opening tool as shown in the pictures.
Unscrew the two screws shown circled in red in the picture.
Use a #0 Phillips screwdriver to remove the two 4 mm screws
Lift up the plug that connects the camera to the motherboard using the plastic opening tool as shown in the pictures.
1024
Step 2
- After the rear facing camera is removed, you may now remove the front facing camera.
- Use the nylon spudger to disconnect the cable on the motherboard.
- Make sure you use the black plastic spudger to pry up the aluminum tape holding the front facing camera. Be careful as the tape is fragile.
After the rear facing camera is removed, you may now remove the front facing camera.
Use the nylon spudger to disconnect the cable on the motherboard.
Make sure you use the black plastic spudger to pry up the aluminum tape holding the front facing camera. Be careful as the tape is fragile.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
James
Member since: 10/04/2016
401 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 2-1, Nance Fall 2016
Member of USF Tampa, Team 2-1, Nance Fall 2016
USFT-NANCE-F16S2G1
3 Members
5 Guides authored