Dell Xps 10 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Battery
2 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackDell XPS 10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Slide one of the plastic opening tools in the crack on the side of the device with the windows button.
Slide the other plastic opening tool facing the opposite way in the crack next to the first one and pry the back cover off a little bit at a time or slide them around the edge as necessary.
Finally, slide the two plastic opening tools all around the case until it is open.

Slide one of the plastic opening tools in the crack on the side of the device with the windows button.

Slide the other plastic opening tool facing the opposite way in the crack next to the first one and pry the back cover off a little bit at a time or slide them around the edge as necessary.

Finally, slide the two plastic opening tools all around the case until it is open.

1024

Step 2

Unscrew the three black, 4mm screws with a phillips screwdriver size PH 0 (one of which is under the gold colored ribbon cable.)
Unscrew the three gray, 3mm screws with the same screwdriver (phillips screwdriver size PH 0.)
Unplug the connector the connects the battery to the mother board.
Make sure to use a plastic opening tool instead of a metal spudger to avoid any unnecessary accidental shorting out of components.

Unscrew the three black, 4mm screws with a phillips screwdriver size PH 0 (one of which is under the gold colored ribbon cable.)

Unscrew the three gray, 3mm screws with the same screwdriver (phillips screwdriver size PH 0.)

Unplug the connector the connects the battery to the mother board.

Make sure to use a plastic opening tool instead of a metal spudger to avoid any unnecessary accidental shorting out of components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 7 other contributors

                    saraspam

Member since: 09/28/2016

244 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 2-1, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 2-1, Nance Fall 2016 



                    USFT-NANCE-F16S2G1                     


                                            3 Members                     


                                            5 Guides authored

Better Introduction#

Introduction#

What you need#

#

#

#

#

Team#

#

Better Introduction

Introduction

What you need

Team