Difficulty

Moderate

Steps

6

Time Required

                          15 minutes            

Sections

2

  • Cover Panel
  • 4 steps
  • HDMI/USB Cable
  • 2 steps

Flags

0

  • BackDell VRP100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Cover Panel               
  • Remove the black foam padding by peeling away slowly.
  • Remove the front and back padding from the headset by peeling away slowly.

Remove the black foam padding by peeling away slowly.

Remove the front and back padding from the headset by peeling away slowly.

1024

Step 2

  • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
  • Cover panel may need to be pushed in before inserting screws.

Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

Cover panel may need to be pushed in before inserting screws.

Step 3

  • Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

Step 4

  • Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
  • Carefully remove the lens and motherboard assembly from the white casing.

Carefully remove the lens and motherboard assembly from the white casing.

Step 5

              HDMI/USB Cable               
  • Remove the two 3.4mm PH000 screws from the cover by rotating counter-clockwise.
  • Peel off the tape using your hands or the blunt nose tweezers.

Remove the two 3.4mm PH000 screws from the cover by rotating counter-clockwise.

Peel off the tape using your hands or the blunt nose tweezers.

Step 6

  • Remove the two 5.5mm PH000 screws from the cover by rotating counter-clockwise.
  • Hold the HDMI/USB cable and remove from the connection.

Remove the two 5.5mm PH000 screws from the cover by rotating counter-clockwise.

Hold the HDMI/USB cable and remove from the connection.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Marco Salazar                     

Member since: 10/08/2018

375 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team S17-G1, White Fall 2018                        

                                                  Member of Cal Poly, Team S17-G1, White Fall 2018 



                    CPSU-WHITE-F18S17G1                     


                                            4 Members                     


                                            12 Guides authored                     

jason.d.spiller - Feb 17, 2019

Reply

Hi

Nice breakdown. Would you know where I can purchase a spare cable (I’m in the UK) as I can find nothing online regarding where to buy one.

Thanks

Jason

Filipi Nascimento Silva - Mar 19, 2019

Reply

Me too, looking for a cable replacement.

Tom Powell - Mar 21, 2019

Reply

also looking for replacement cable as mine has twisted up so bad that there is no longer and picture coming through when can i buy the replacement

Peter Hindes - Mar 23, 2019

Reply

I am also looking for a replacement cable. Could it be soldered on from another cable?

geebee800 - Mar 31, 2019

Reply

Me too for replacement cable specs please