Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Cover Panel
- 4 steps
Flags
0
BackDell VRP100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cover Panel
- Remove the black foam padding by peeling away slowly.
- Remove the front and back padding from the headset by peeling away slowly.
Remove the black foam padding by peeling away slowly.
Remove the front and back padding from the headset by peeling away slowly.
1024
Step 2
- Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
- Cover panel may need to be pushed in before inserting screws.
Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
Cover panel may need to be pushed in before inserting screws.
Step 3
- Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.
Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.
Step 4
- Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
- Carefully remove the lens and motherboard assembly from the white casing.
Carefully remove the lens and motherboard assembly from the white casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Marco Salazar
Member since: 10/08/2018
375 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team S17-G1, White Fall 2018
Member of Cal Poly, Team S17-G1, White Fall 2018
CPSU-WHITE-F18S17G1
4 Members
12 Guides authored
