Dell Vrp100 Auxiliary Cord Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          20 minutes            

Sections

2

• Cover Panel
• 4 steps
• Auxiliary Cord
• 3 steps

Flags

0

• BackDell VRP100

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cover Panel               

• Remove the black foam padding by peeling away slowly.
• Remove the front and back padding from the headset by peeling away slowly.

Remove the black foam padding by peeling away slowly.

Remove the front and back padding from the headset by peeling away slowly.

1024

Step 2

• Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
• Cover panel may need to be pushed in before inserting screws.

Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.

Cover panel may need to be pushed in before inserting screws.

Step 3

• Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.

Step 4

• Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
• Carefully remove the lens and motherboard assembly from the white casing.

Carefully remove the lens and motherboard assembly from the white casing.

Step 5

              Auxiliary Cord               

• Separate the external connector of the auxiliary cord.
• A spudger may be needed to separate the connector.

Separate the external connector of the auxiliary cord.

A spudger may be needed to separate the connector.

Step 6

• Remove the four 2.5mm PH000 screws by rotating counter-clockwise.
• Separate the lens housing from the motherboard panel.

Remove the four 2.5mm PH000 screws by rotating counter-clockwise.

Separate the lens housing from the motherboard panel.

Step 7

• In the top right corner of the motherboard panel, peel back the yellow tape covering the bundled auxiliary cable connector using tweezers.
• Carefully pull out the bundled cable connectors.

In the top right corner of the motherboard panel, peel back the yellow tape covering the bundled auxiliary cable connector using tweezers.

Carefully pull out the bundled cable connectors.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Chris Grabow                     

Member since: 10/08/2018

285 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team S17-G1, White Fall 2018                        

                                                  Member of Cal Poly, Team S17-G1, White Fall 2018 



                    CPSU-WHITE-F18S17G1                     


                                            4 Members                     


                                            12 Guides authored                     

Domenico Rescigno - Sep 6, 2020

Reply

Hello, where i can buy the aux cable?