Difficulty
Moderate
Steps
2
Time Required
5 minutes
Sections
1
- Joystick
- 2 steps
Flags
0
BackDell VRC100-R
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Joystick
- Hold the joystick down with your left thumb to make space for the plastic opening tool.
- Insert the plastic opening tool into the circle above the joystick and pry upwards to lift the front panel.
- Slide the plastic opening tool around the perimeter until you can lift the front panel.
- You may hear a popping noise when you pry off the front panel.
Hold the joystick down with your left thumb to make space for the plastic opening tool.
Insert the plastic opening tool into the circle above the joystick and pry upwards to lift the front panel.
Slide the plastic opening tool around the perimeter until you can lift the front panel.
You may hear a popping noise when you pry off the front panel.
1024
Step 2
- Grab the joystick and pull away from the controller to remove it.
Grab the joystick and pull away from the controller to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Kenneth Liu
Member since: 04/18/2018
169 Reputation
2 Guides authored
Badges:
2
Team
Cal Poly, Team S18-G3, Livingston Spring 2018
Member of Cal Poly, Team S18-G3, Livingston Spring 2018
CPSU-LIVINGSTON-S18S18G3
4 Members
5 Guides authored
