Dell Vostro V130 Led Cover Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 20 minutes            

Sections

3

• Base Cover
• 2 steps
• Dell Vostro V130 Battery Removal
• 3 steps
• LED Cover
• 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Vostro V130

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws               

• Remove the screws that secure the base cover to the computer.

Remove the screws that secure the base cover to the computer.

1024

Step 2

              Removing the Base Cover               

• Slide the base cover towards the front of the computer. Lift it up and away from the computer.
• If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Slide the base cover towards the front of the computer. Lift it up and away from the computer.

If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Step 3

              Disconnecting the Battery               

• Lift the black cable-release clip to release the battery cable from the connector on the system board and disconnect the battery cable.

Lift the black cable-release clip to release the battery cable from the connector on the system board and disconnect the battery cable.

Step 4

              Remove Battery Screws               

• Remove the screws that secure the battery to the computer.

Remove the screws that secure the battery to the computer.

Step 5

              Lift the Battery               

• Lift the battery up and away from the computer.
• If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Lift the battery up and away from the computer.

Step 6

              LED Cover               

• Starting on the right side of the system, use a plastic scribe to pry up the LED cover from the computer.

Starting on the right side of the system, use a plastic scribe to pry up the LED cover from the computer.

Step 7

              Removing the LED Cover               

• Pull the LED cover toward the keyboard and remove it from the computer.
• If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Pull the LED cover toward the keyboard and remove it from the computer.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Johnathan Hammond                     

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored