Dell Vostro A90 Solid State Drive Removal Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          6 - 15 minutes            

Sections

3

• Dell Vostro A90 Battery Removal
• 1 step
• Memory Module
• 2 steps
• Dell Vostro A90 Solid-State Drive Removal
• 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Vostro A90

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Removing the Battery               

• Turn the computer over.
• Slide the battery-bay release latch and the battery-lock latch towards the outer edges.
• Slide the battery out of the battery bay.
• Turn the computer top-side up, open the display, and press the power button to ground the system board.
• If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Turn the computer over.

Slide the battery-bay release latch and the battery-lock latch towards the outer edges.

Slide the battery out of the battery bay.

Turn the computer top-side up, open the display, and press the power button to ground the system board.

If this is all you are doing Follow Step In Reverse if not Go to Next Step.

1024

Step 2

              Remove the Screws               

• Remove the two screws on the module cover.

Remove the two screws on the module cover.

Step 3

              Lifting the Cover               

• Lift the cover off the computer at an angle as shown in the figure.
• If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Lift the cover off the computer at an angle as shown in the figure.

Step 4

              Remove Solid-State Drive               

• Remove the two screws that secure the solid-state drive.
• Lift the solid-state drive out of its system board connector.
• If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Remove the two screws that secure the solid-state drive.

Lift the solid-state drive out of its system board connector.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Johnathan Hammond                     

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored                     

Terrence15 - May 2, 2018

Reply

Remember the add the Warning steps that are found in the Service Manuals at the beginning of the guides.