Dell Vostro 3550 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          30 minutes            

Sections

1

• Display Assembly
• 8 steps

Flags

0

• BackDell Vostro 3550

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Display Assembly               

• Grip the back trim of the laptop and pull upwards to remove it.

Grip the back trim of the laptop and pull upwards to remove it.

1024

Step 2

• Slide the plastic opening tool around the perimeter of the display bezel.
• Carefully remove the bezel from the display.

Slide the plastic opening tool around the perimeter of the display bezel.

Carefully remove the bezel from the display.

Step 3

• Remove the six 7 mm Phillips #0 screws attaching the display to the upper casing of the laptop.
• When all six screws are removed, gently lower the display to reveal the camera cable.

Remove the six 7 mm Phillips #0 screws attaching the display to the upper casing of the laptop.

When all six screws are removed, gently lower the display to reveal the camera cable.

Step 4

• Disconnect the camera ribbon cable by gently pulling it away from its connector.

Disconnect the camera ribbon cable by gently pulling it away from its connector.

Step 5

• Remove the four 5 mm Phillips #0 screws (two on either side) securing the display to the metal frame.

Remove the four 5 mm Phillips #0 screws (two on either side) securing the display to the metal frame.

Step 6

• Gently lower the display into a resting position.

Gently lower the display into a resting position.

Step 7

• Loosen the clear tape fastening the ribbon cable to the display.
• Carefully pull the ribbon cable away from the connector.

Loosen the clear tape fastening the ribbon cable to the display.

Carefully pull the ribbon cable away from the connector.

Step 8

• Peel the ribbon cable away from the display.
• Remove the display from the laptop.

Peel the ribbon cable away from the display.

Remove the display from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Dylan J. Souza                     

Member since: 03/22/2019

775 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team S8-G6, Bailey Spring 2019                        

                                                  Member of UMass Dartmouth, Team S8-G6, Bailey Spring 2019 



                    UMASSD-BAILEY-S19S8G6                     


                                            3 Members                     


                                            7 Guides authored