Difficulty

Easy

Steps

6

Time Required

                          10 - 20 minutes

Sections

3

  • Battery
  • 3 steps
  • Service Cover
  • 2 steps
  • WiFi Card
  • 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Vostro 3500

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Sliding the Battery Latch
  • Flip the computer over.
  • Slide the battery release latch to the unlock position.

Flip the computer over.

Slide the battery release latch to the unlock position.

1024

Step 2

              Sliding the Battery Release Latch
  • Slide the other battery release latch to the unlock position.

Slide the other battery release latch to the unlock position.

Step 3

              Removing the Battery
  • Slide the battery and remove it from the computer.

Slide the battery and remove it from the computer.

Step 4

              Remove the Screws
  • Turn the laptop over and remove two screws securing the service cover.

Turn the laptop over and remove two screws securing the service cover.

Step 5

              Removing the Base Cover
  • Prise up the service cover and remove it from the computer. Clips along the edges can be snapped open except for those on the left hand edge (as shown in the photo) which have to be disengaged after all the others by romoving the cover in the direction shown.
  • On resassembly, insert the clips on the left hand edge then snap all te others home by applying firm pressure along the other edges of the cover.

Prise up the service cover and remove it from the computer. Clips along the edges can be snapped open except for those on the left hand edge (as shown in the photo) which have to be disengaged after all the others by romoving the cover in the direction shown.

On resassembly, insert the clips on the left hand edge then snap all te others home by applying firm pressure along the other edges of the cover.

Step 6

              WiFi card removal
  • Gently snap off the two aerial connectors from the WiFi card.
  • On reassembly they simply snap back on with firm pressure, but first make sure they are positioned correctly over their sockets.
  • Remove a single screw adjacent to one of the aerial sockets retaining the wWiFi card, then lift it out.
  • On resassembly, ensure that the WiFi card is fully inserted into its sovket before angling it down and reinserting the screw.

Gently snap off the two aerial connectors from the WiFi card.

On reassembly they simply snap back on with firm pressure, but first make sure they are positioned correctly over their sockets.

Remove a single screw adjacent to one of the aerial sockets retaining the wWiFi card, then lift it out.

On resassembly, ensure that the WiFi card is fully inserted into its sovket before angling it down and reinserting the screw.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Philip Le Riche

Member since: 02/18/2014

27,989 Reputation

                                      45 Guides authored                  



                       Badges:
                       45







                                                        +42 more badges

Team

                       Restart Project                        

                                                  Member of Restart Project 



                    Community                     


                                            16 Members                     


                                            269 Guides authored