Difficulty

Moderate

Steps

19

Time Required

                          20 - 40 minutes            

Sections

5

  • Keyboard
  • 4 steps
  • Access Panel
  • 2 steps
  • Display-Hinge Cover
  • 2 steps
  • Palm-Rest
  • 7 steps
  • Hard Drive
  • 4 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Vostro 3360

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the Screw               
  • Remove the screw that secures the keyboard to the chassis.

Remove the screw that secures the keyboard to the chassis.

1024

Step 2

              Prying the Keyboard               
  • Starting on the right side of the system, use a plastic scribe to pry up the keyboard from the computer.

Starting on the right side of the system, use a plastic scribe to pry up the keyboard from the computer.

Step 3

              Flipping the Keyboard               
  • Flip the keyboard over and lay it on the palmrest.

Flip the keyboard over and lay it on the palmrest.

Step 4

              Lifting the Clip               
  • Lift the clip to release the keyboard cable and disconnect it from the computer.

Lift the clip to release the keyboard cable and disconnect it from the computer.

Step 5

              Remove the Screw               
  • Remove the screw that secures the access panel to the computer.

Remove the screw that secures the access panel to the computer.

Step 6

              Remove the Access Panel               
  • Remove the access panel from the computer.

Remove the access panel from the computer.

Step 7

              Display-Hinge Cover               
  • Remove the screws that secure the display-hinge cover to the computer

Remove the screws that secure the display-hinge cover to the computer

Step 8

              Remove the Display Hinge Cover               
  • Remove the display-hinge cover from the computer.

Remove the display-hinge cover from the computer.

Step 9

              Prying the Rubber Pads               
  • Using a plastic scribe pry out the rubber pads that cover the front screws on the base cover.

Using a plastic scribe pry out the rubber pads that cover the front screws on the base cover.

Step 10

              Remove the Screws               
  • Remove the screws that secure the palm-rest to the computer.

Remove the screws that secure the palm-rest to the computer.

Step 11

              Disconnecting the Board Cable               
  • Disconnect the quick launch board cable, the finger print reader cable, and the palmrest cable from the system board.

Disconnect the quick launch board cable, the finger print reader cable, and the palmrest cable from the system board.

Step 12

              Disconnecting the LED Cable               
  • Disconnect the power LED cable and the LED board cable from the system board.

Disconnect the power LED cable and the LED board cable from the system board.

Step 13

              Remove the Screws               
  • Remove the screws that secure the palmrest to the front of the computer.

Remove the screws that secure the palmrest to the front of the computer.

Step 14

              Prying the Edges of the Palm-Rest               
  • Pry along the edges of the palmrest to release the palmrest.

Pry along the edges of the palmrest to release the palmrest.

Step 15

              Lifting the Palm Rest               
  • Lift the palm-rest up and away from the computer.

Lift the palm-rest up and away from the computer.

Step 16

              Hard Drive               
  • Remove the screws that secure the hard drive to the computer.

Remove the screws that secure the hard drive to the computer.

Step 17

  • Lift the hard drive to disconnect the hard-drive cable

Lift the hard drive to disconnect the hard-drive cable

Step 18

  • Disconnect the hard-drive cable from the hard drive and remove the hard drive from the computer

Disconnect the hard-drive cable from the hard drive and remove the hard drive from the computer

Step 19

  • Remove the screws that secure the hard-drive bracket to the hard drive and remove the hard drive bracket from it.

Remove the screws that secure the hard-drive bracket to the hard drive and remove the hard drive bracket from it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Johnathan Hammond                     

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored