Difficulty
Moderate
Steps
8
Time Required
7 - 10 minutes
Sections
3
- Battery
- 3 steps
- Back Panel
- 2 steps
- Wi-Fi Card
- 3 steps
Flags
0
BackDell Vostro 1710
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make certain that the power to your laptop is off.
- Press and slide the two buttons outwards and away from the battery.
Make certain that the power to your laptop is off.
Press and slide the two buttons outwards and away from the battery.
1024
Step 2
- Slide the battery away and parallel from the laptop.
Slide the battery away and parallel from the laptop.
Step 3
- Remove the battery from the slot.
Remove the battery from the slot.
Step 4
Back Panel
- Unscrew the eight 6mm screws with a Philips #1 screw driver.
Unscrew the eight 6mm screws with a Philips #1 screw driver.
Step 5
- Lift back cover from the groove on the left side of the cover next to the symbol.
Lift back cover from the groove on the left side of the cover next to the symbol.
Step 6
Wi-Fi Card
- Remove the two 3mm Philips #1 screws from the top of the Wi-Fi card.
Remove the two 3mm Philips #1 screws from the top of the Wi-Fi card.
Step 7
- Unclip both black and white wires from the Wi-Fi card.
Unclip both black and white wires from the Wi-Fi card.
Step 8
- Gently pull Wi-Fi card out of its position at its angle.
Gently pull Wi-Fi card out of its position at its angle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jeremy Campeau
Member since: 03/20/2018
339 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team S3-G7, Peak Spring 2018
Member of UMass Dartmouth, Team S3-G7, Peak Spring 2018
UMASSD-PEAK-S18S3G7
3 Members
8 Guides authored
