Difficulty

Easy

Steps

4

Time Required

                          10 - 20 minutes

Sections

  • Battery
  • 1 step
  • Hinge Cover
  • 1 step
  • KeyBoard
  • 1 step
  • Memory Module
  • 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Vostro 1500

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Slide the battery release latches until they click into place.
  • Slide the battery out of the battery bay.

Slide the battery release latches until they click into place.

Slide the battery out of the battery bay.

1024

Step 2

              Hinge Cover
  • Open the display all the way so that it rests flat on your work surface.
  • NOTICE: To avoid damage to the hinge cover, do not lift the cover on both sides simultaneously.
  • Insert a plastic scribe into the indent to lift the hinge cover on the right side.
  • Moving from right to left, ease the hinge cover up, then remove it and set it aside.

Open the display all the way so that it rests flat on your work surface.

NOTICE: To avoid damage to the hinge cover, do not lift the cover on both sides simultaneously.

Insert a plastic scribe into the indent to lift the hinge cover on the right side.

Moving from right to left, ease the hinge cover up, then remove it and set it aside.

Step 3

              KeyBoard
  • Remove the two M2.5 x 5-mm screws at the top of the keyboard.
  • NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.
  • Lift the keyboard and hold it up and slightly forward to access to the keyboard connector.
  • Rotate the keyboard connector latch upward to release the keyboard cable.
  • Slide the keyboard cable out of the keyboard connector.

Remove the two M2.5 x 5-mm screws at the top of the keyboard.

NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.

Lift the keyboard and hold it up and slightly forward to access to the keyboard connector.

Rotate the keyboard connector latch upward to release the keyboard cable.

Slide the keyboard cable out of the keyboard connector.

Step 4

              Memory Module
  • Lift the memory module cover But Do Not Remove It.
  • NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
  • Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
  • Remove the module from the connector.

Lift the memory module cover But Do Not Remove It.

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.

Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

Remove the module from the connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Johnathan Hammond

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored