Difficulty
Easy
Steps
3
Time Required
7 - 15 minutes
Sections
- Base Cover
- 1 step
- Battery (model 99NF2)
- 1 step
- Memory Module
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Vostro 15 7570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Base Cover
- Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].
- Pry the base cover from the edge [2].
- Lift the base cover away from the computer
Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].
Pry the base cover from the edge [2].
Lift the base cover away from the computer
1024
Step 2
Battery (model 99NF2)
- Disconnect the battery cable from the connector on the system board [1].
- Remove the M2x3L screws that secure the battery to the computer [2].
Disconnect the battery cable from the connector on the system board [1].
Remove the M2x3L screws that secure the battery to the computer [2].
Step 3
Memory Module
- Pry the clips securing the memory module until the memory pops-up [1]
- Lift the memory module away from the connector [2].
Pry the clips securing the memory module until the memory pops-up [1]
Lift the memory module away from the connector [2].
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Johnathan Hammond
Member since: 02/28/2018
44,151 Reputation
408 Guides authored
Badges:
24
+21 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
