Difficulty
Moderate
Steps
11
Time Required
10 minutes
Sections
2
- Battery
- 3 steps
- Screen
- 8 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackDell Vostro 1400
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Be sure the power is off and all cables are unplugged from the device before starting.
- After flipping over the laptop, the battery is on the bottom side of the laptop.
- Find the tabs on both the left and right side of the battery.
Be sure the power is off and all cables are unplugged from the device before starting.
After flipping over the laptop, the battery is on the bottom side of the laptop.
Find the tabs on both the left and right side of the battery.
1024
Step 2
- Push tabs toward the outside of the laptop until they lock in place.
Push tabs toward the outside of the laptop until they lock in place.
Step 3
- Push the battery forward to eject it from the laptop.
Push the battery forward to eject it from the laptop.
Step 4
Screen
- Please make sure your device is completely turned off and everything is unplugged from the device
- Open the laptop.
Please make sure your device is completely turned off and everything is unplugged from the device
Open the laptop.
Step 5
- Remove the 6 screw hole covers surrounding the screen.
- Remove the 6 screws that were underneath the screw covers.
Remove the 6 screw hole covers surrounding the screen.
Remove the 6 screws that were underneath the screw covers.
Step 6
- Carefully remove the plastic surrounding the screen by pulling off, starting at the bottom.
- Remove the two (2.5mm x 5mm) screws at the top, by the camera.
Carefully remove the plastic surrounding the screen by pulling off, starting at the bottom.
Remove the two (2.5mm x 5mm) screws at the top, by the camera.
Step 7
- Remove the two 5mm screws from the camera above the screen.
- Remove the two 5mm screws from the bottom of the screen.
Remove the two 5mm screws from the camera above the screen.
Remove the two 5mm screws from the bottom of the screen.
Step 8
- Carefully remove the screen from the back cover.
Carefully remove the screen from the back cover.
Step 9
- Lift up the black tag holding the camera and cable together.
- Unplug the camera from the cable.
Lift up the black tag holding the camera and cable together.
Unplug the camera from the cable.
Step 10
- Unplug the two cables connected to the screen.
Unplug the two cables connected to the screen.
Step 11
- Remove the six 3mm screws on each side of the screen.
- Remove the railing on each side of the screen.
- The railing will be marked “L” for left side or “R” for the right. This should assist in reassembly.
Remove the six 3mm screws on each side of the screen.
Remove the railing on each side of the screen.
The railing will be marked “L” for left side or “R” for the right. This should assist in reassembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
David Hogg
Member since: 03/20/2017
727 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Texas Tech, Team S8-G2, Bennett Spring 2017
Member of Texas Tech, Team S8-G2, Bennett Spring 2017
TTU-BENNETT-S17S8G2
4 Members
5 Guides authored
