Difficulty

Moderate

Steps

4

Time Required

                          5 - 10 minutes            

Sections

2

  • Rear Case/Midframe
  • 2 steps
  • Battery
  • 2 steps

Flags

0

  • BackDell Venue 8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case/Midframe               
  • Hold the device with the screen facing up. Gently wedge your plastic opening tool into the crease, and run it along the perimeter of the case
  • You will hear click sounds as the clips unhinge
  • Remove the back panel of the device.

Hold the device with the screen facing up. Gently wedge your plastic opening tool into the crease, and run it along the perimeter of the case

You will hear click sounds as the clips unhinge

Remove the back panel of the device.

1024

Step 2

  • Remove the 14 screws with the T-5 Torx screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)
  • The silver screws are marked with an “S” or a sticker [S1.6(Silver)] See the corrected image
  • 4.45mm Silver screws
  • 3.6mm Black screws
  • Gently snap the perimeter clips open, and remove the internal plastic case.

Remove the 14 screws with the T-5 Torx screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)

The silver screws are marked with an “S” or a sticker [S1.6(Silver)] See the corrected image

4.45mm Silver screws

3.6mm Black screws

Gently snap the perimeter clips open, and remove the internal plastic case.

Step 3

              Battery               
  • Unclip the power clip from the motherboard by pulling down gently towards the bottom of the tablet.

Unclip the power clip from the motherboard by pulling down gently towards the bottom of the tablet.

Step 4

  • Gently pry the battery away from the device with the plastic opening tool to remove it.
  • The battery is held on to the tablet by a light adhesive

Gently pry the battery away from the device with the plastic opening tool to remove it.

The battery is held on to the tablet by a light adhesive

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Andrea                     

Member since: 02/19/2015

1,056 Reputation

                                      5 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges                           

Team

                       USF Tampa, Team 9-2, Leahy Winter 2015                        

                                                  Member of USF Tampa, Team 9-2, Leahy Winter 2015 



                    USFT-LEAHY-W15S9G2                     


                                            3 Members                     


                                            12 Guides authored