Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

3

  • Rear Case
  • 1 step
  • Battery
  • 2 steps
  • Speaker
  • 4 steps

Flags

0

  • BackDell Venue 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Use a spudger or your fingers to pry off the back case.
  • If your case is badly damaged, use caution because the fragments may be sharp.

Use a spudger or your fingers to pry off the back case.

If your case is badly damaged, use caution because the fragments may be sharp.

1024

Step 2

              Battery
  • Gently disconnect the battery from the motherboard using your fingers or a pair of tweezers.

Gently disconnect the battery from the motherboard using your fingers or a pair of tweezers.

Step 3

  • Remove the battery by pulling it from the edges and carefully peeling it off of the base.
  • There is adhesive keeping the battery in place, so don’t be afraid to use a little extra force.
  • Do not bend or warp the battery in any way as it can be a fire hazard.

Remove the battery by pulling it from the edges and carefully peeling it off of the base.

There is adhesive keeping the battery in place, so don’t be afraid to use a little extra force.

Do not bend or warp the battery in any way as it can be a fire hazard.

Step 4

              Speaker
  • Use a spudger to remove the ribbon cable that is around the speaker wire.

Use a spudger to remove the ribbon cable that is around the speaker wire.

Step 5

  • Disconnect the speaker wire from the motherboard by prying the connector upwards with the spudger.

Disconnect the speaker wire from the motherboard by prying the connector upwards with the spudger.

Step 6

  • Remove the plastic covering on the speaker.

Remove the plastic covering on the speaker.

Step 7

  • Gently pull on the wire and remove the speaker.

Gently pull on the wire and remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Stephen Rousseau

Member since: 01/20/2015

663 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 11-4, Blackwell Winter 2015                        

                                                  Member of USF Tampa, Team 11-4, Blackwell Winter 2015 



                    USFT-BLACKWELL-W15S11G4                     


                                            4 Members                     


                                            10 Guides authored