Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
3
- Rear Case
- 1 step
- Battery
- 2 steps
- Rear Facing Camera
- 2 steps
Flags
0
BackDell Venue 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Use a spudger or your fingers to pry off the back case.
- If your case is badly damaged, use caution because the fragments may be sharp.
Use a spudger or your fingers to pry off the back case.
If your case is badly damaged, use caution because the fragments may be sharp.
1024
Step 2
Battery
- Gently disconnect the battery from the motherboard using your fingers or a pair of tweezers.
Gently disconnect the battery from the motherboard using your fingers or a pair of tweezers.
Step 3
- Remove the battery by pulling it from the edges and carefully peeling it off of the base.
- There is adhesive keeping the battery in place, so don’t be afraid to use a little extra force.
- Do not bend or warp the battery in any way as it can be a fire hazard.
Remove the battery by pulling it from the edges and carefully peeling it off of the base.
There is adhesive keeping the battery in place, so don’t be afraid to use a little extra force.
Do not bend or warp the battery in any way as it can be a fire hazard.
Step 4
Rear Facing Camera
- Use a spudger to disconnect the camera from the motherboard.
Use a spudger to disconnect the camera from the motherboard.
Step 5
- Remove the camera from the device.
Remove the camera from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Stephen Rousseau
Member since: 01/20/2015
663 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 11-4, Blackwell Winter 2015
Member of USF Tampa, Team 11-4, Blackwell Winter 2015
USFT-BLACKWELL-W15S11G4
4 Members
10 Guides authored
