Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
- Battery
- 1 step
- Base Cover
- 1 step
- Memory Module
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Studio XPS M1640
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Slide the battery release latch to the side. {2}
- Slide the battery out of the battery bay. {1}
Slide the battery release latch to the side. {2}
Slide the battery out of the battery bay. {1}
1024
Step 2
Base Cover
- Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
Step 3
Memory Module
- NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
- Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
- Remove the module from the connector.
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
Remove the module from the connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Johnathan Hammond
Member since: 02/28/2018
44,151 Reputation
408 Guides authored
Badges:
24
+21 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored