Dell Studio Xps 1647 Hard Drive Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 - 20 minutes            

Sections

3

• Battery
• 1 step
• Base Cover
• 1 step
• Hard Drive
• 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Studio XPS 1647

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Slide the battery release latch to the side. {2}
• Slide the battery out of the battery bay. {1}

Slide the battery release latch to the side. {2}

Slide the battery out of the battery bay. {1}

1024

Step 2

              Base Cover               

• Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

Step 3

              Hard Drive               

• Remove the three screws securing the hard drive assembly to the computer base.
• Pull the blue pull-tab to disconnect the hard drive assembly from the system board connector.
• Lift the hard drive assembly out of the computer base.

Remove the three screws securing the hard drive assembly to the computer base.

Pull the blue pull-tab to disconnect the hard drive assembly from the system board connector.

Lift the hard drive assembly out of the computer base.

Step 4

• NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging .
• Remove the four screws that secure the hard drive bracket to the hard drive and remove the bracket.

NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging .

Remove the four screws that secure the hard drive bracket to the hard drive and remove the bracket.

Step 5

• Pull the interposer to disconnect it from the hard drive.

Pull the interposer to disconnect it from the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Johnathan Hammond                     

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored