Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
- Battery
- 1 step
- Back Panel
- 1 step
- RAM
- 1 step
Flags
1
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackDell Studio 1737
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the battery release slider all the way to the right and push the battery straight out of the back of the computer
Slide the battery release slider all the way to the right and push the battery straight out of the back of the computer
1024
Step 2
Back Panel
- Unscrew the 8 Phillips head screws marked in the photo.
- Even when the screws are fully detached, they will not come out of the panel.
- Use a plastic opening tool to pry the panel away from the laptop body.
- Lift the panel up and away.
Unscrew the 8 Phillips head screws marked in the photo.
Even when the screws are fully detached, they will not come out of the panel.
Use a plastic opening tool to pry the panel away from the laptop body.
Lift the panel up and away.
Step 3
RAM
- Release RAM sticks by pulling clips out in opposite directions of each other.
- Pull RAM stick up and out.
Release RAM sticks by pulling clips out in opposite directions of each other.
Pull RAM stick up and out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Joseph Jacavone
Member since: 03/10/2017
743 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team S8-G4, Catania Spring 2017
Member of UMass Dartmouth, Team S8-G4, Catania Spring 2017
UMASSD-CATANIA-S17S8G4
3 Members
8 Guides authored
