Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Battery
  • 3 steps
  • Display
  • 5 steps

Flags

0

  • BackDell Studio 1555

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off and unplug the laptop.
  • Failure to properly turn off device before handling the battery could result in electrical shock.
  • Flip the laptop so the underside is facing up with the battery closest to you.

Turn off and unplug the laptop.

Failure to properly turn off device before handling the battery could result in electrical shock.

Flip the laptop so the underside is facing up with the battery closest to you.

1024

Step 2

  • Slide the locking switch to the left to release the battery.

Slide the locking switch to the left to release the battery.

Step 3

  • Gently pull the battery away from the device.

Gently pull the battery away from the device.

Step 4

              Display
  • Insert a plastic opening tool between the bezel and the display cover.
  • Wiggle it to the release the latches.
  • Separate the bezel from the cover.

Insert a plastic opening tool between the bezel and the display cover.

Wiggle it to the release the latches.

Separate the bezel from the cover.

Step 5

  • Remove the four 3 mm screws securing the LCD using the #1 Phillips screwdriver.

Remove the four 3 mm screws securing the LCD using the #1 Phillips screwdriver.

Step 6

  • Separate the LCD assembly from the display cover so you will be able to access the webcam cable.
  • Unplug the camera cable.

Separate the LCD assembly from the display cover so you will be able to access the webcam cable.

Unplug the camera cable.

Step 7

  • Place the LCD face down on the top cover.
  • Remove the sticky tape securing the video cable connector.
  • Unplug the video cable from the screen.

Place the LCD face down on the top cover.

Remove the sticky tape securing the video cable connector.

Unplug the video cable from the screen.

Step 8

  • Remove the LCD from the laptop.
  • Remove the four 3mm screws holding the mounting brackets using the #1 Phillips screwdriver. Two on each side.
  • You will have to transfer the mounting brackets to the new screen.

Remove the LCD from the laptop.

Remove the four 3mm screws holding the mounting brackets using the #1 Phillips screwdriver. Two on each side.

You will have to transfer the mounting brackets to the new screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Josh Boone

Member since: 10/10/2016

586 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Sam Houston State, Team 12-3, Blackburne Fall 2016                        

                                                  Member of Sam Houston State, Team 12-3, Blackburne Fall 2016 



                    SHSU-BLACKBURNE-F16S12G3                     


                                            3 Members                     


                                            6 Guides authored