Difficulty
Easy
Steps
5
Time Required
10 - 20 minutes
Sections
3
- Battery
- 1 step
- Base Cover
- 1 step
- Hard Drive
- 3 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Studio 1450
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Slide the battery release latch until it clicks into place.
- Slide the battery out of the battery bay.
Slide the battery release latch until it clicks into place.
Slide the battery out of the battery bay.
1024
Step 2
Base Cover
- Turn the computer over and loosen the six captive screws on the base cover.
- Lift the base cover off the computer.
Turn the computer over and loosen the six captive screws on the base cover.
Lift the base cover off the computer.
Step 3
Hard Drive
- Remove the two screws that secure the hard drive to the computer base.
- Slide the hard drive away from the connector using the pull-tab.
Remove the two screws that secure the hard drive to the computer base.
Slide the hard drive away from the connector using the pull-tab.
Step 4
- Tilt the hard drive by 45-degrees and lift it out of the computer base.
Tilt the hard drive by 45-degrees and lift it out of the computer base.
Step 5
- Remove the four screws that secure the hard drive to the hard drive bracket.
- Lift the hard drive off the hard drive bracket.
Remove the four screws that secure the hard drive to the hard drive bracket.
Lift the hard drive off the hard drive bracket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Johnathan Hammond
Member since: 02/28/2018
44,151 Reputation
408 Guides authored
Badges:
24
+21 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
