Difficulty
Easy
Steps
4
Time Required
8 - 15 minutes
Sections
3
- Battery
- 1 step
- Base Cover
- 1 step
- Hard Drive
- 2 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Studio 1435
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Slide the battery release latch to the side.
- Slide the battery out of the battery bay.
Slide the battery release latch to the side.
Slide the battery out of the battery bay.
1024
Step 2
Base Cover
- Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
Step 3
Hard Drive
- Remove the two screws on the hard drive assembly.
Remove the two screws on the hard drive assembly.
Step 4
- Pull the pull tab to disconnect the hard drive assembly from the system board connector.
- Pull the interposer to detach it from the hard drive.
- Remove the four screws (two on either side) to detach the hard drive cage from the hard drive.
- Lift the hard drive cage off the hard drive.
Pull the pull tab to disconnect the hard drive assembly from the system board connector.
Pull the interposer to detach it from the hard drive.
Remove the four screws (two on either side) to detach the hard drive cage from the hard drive.
Lift the hard drive cage off the hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Johnathan Hammond
Member since: 02/28/2018
44,151 Reputation
408 Guides authored
Badges:
24
+21 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored
