Difficulty

Moderate

Steps

9

Time Required

                          25 minutes

Sections

2

  • Front Panel Assembly
  • 7 steps
  • Headphone Jack
  • 2 steps

Flags

0

  • BackDell Streak 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel Assembly
  • Insert the spudger under the capacitive button panel, and slide the spudger all the way around.
  • You will want to heat up the screen edges with the iOpener to help facilitate removal.

Insert the spudger under the capacitive button panel, and slide the spudger all the way around.

You will want to heat up the screen edges with the iOpener to help facilitate removal.

1024

Step 2

  • Remove the button cover by lifting the cover away from the tablet.

Remove the button cover by lifting the cover away from the tablet.

Step 3

  • Using the Torx screwdriver, remove the 4mm screws.

Using the Torx screwdriver, remove the 4mm screws.

Step 4

  • With the Torx screwdriver, remove the two 5mm screws.

With the Torx screwdriver, remove the two 5mm screws.

Step 5

  • Using the spudger, insert it under the black side panel. Slide the spudger all the way around until the cover piece comes off.
  • With the Torx screwdriver, remove the two 4mm screws.

Using the spudger, insert it under the black side panel. Slide the spudger all the way around until the cover piece comes off.

With the Torx screwdriver, remove the two 4mm screws.

Step 6

  • Use the spudger to go along the edges of the device and pop out the latches securing the display to the case.

Use the spudger to go along the edges of the device and pop out the latches securing the display to the case.

Step 7

  • Ribbon cables are very sensitive and prone to breaking
  • Disconnect the ribbon cables by unlocking the connector and pulling the cable out slowly.
  • Make sure all the cables are unplugged before opening the device completely. Failure to do so might lead to broken or torn cables.

Ribbon cables are very sensitive and prone to breaking

Disconnect the ribbon cables by unlocking the connector and pulling the cable out slowly.

Make sure all the cables are unplugged before opening the device completely. Failure to do so might lead to broken or torn cables.

Step 8

              Headphone Jack
  • Using the spudger, disconnect the ribbon cable by lifting up on the connector.
  • Ribbon cables are fragile and easily broken.

Using the spudger, disconnect the ribbon cable by lifting up on the connector.

Ribbon cables are fragile and easily broken.

Step 9

  • Pull the headphone jack up, away from the case.

Pull the headphone jack up, away from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Ali Benjelloun

Member since: 10/02/2016

376 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 4-6, Passmore Fall 2016                        

                                                  Member of USF Tampa, Team 4-6, Passmore Fall 2016 



                    USFT-PASSMORE-F16S4G6                     


                                            3 Members                     


                                            12 Guides authored