Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes

Sections

3

  • Battery
  • 1 step
  • Base Cover
  • 1 step
  • Hard Drive
  • 4 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Precision M6700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Slide the release latch to unlock the battery.
  • Flip and remove the battery from the computer.

Slide the release latch to unlock the battery.

Flip and remove the battery from the computer.

1024

Step 2

              Base Cover
  • Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover.
  • Flip and remove the base cover from the computer

Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover.

Flip and remove the base cover from the computer

Step 3

              Hard Drive
  • Remove the screws that secure the primary hard drive to the computer. Slide the primary hard -drive latch to the unlock position and pull out the hard drive from the computer.

Remove the screws that secure the primary hard drive to the computer. Slide the primary hard -drive latch to the unlock position and pull out the hard drive from the computer.

Step 4

  • Flex the hard-drive bracket outward and pull out the hard drive from the bracket.
  • NOTE: A rubber filler is installed to the hard-drive bracket for 7 mm hard drives. It is designed to prevent vibrations and for correct installation of the 7 mm hard drives. 9 mm hard drives do not require the filler when installed into the hard-drive bracket.

Flex the hard-drive bracket outward and pull out the hard drive from the bracket.

NOTE: A rubber filler is installed to the hard-drive bracket for 7 mm hard drives. It is designed to prevent vibrations and for correct installation of the 7 mm hard drives. 9 mm hard drives do not require the filler when installed into the hard-drive bracket.

Step 5

  • Remove the screw that secure that secondary hard drive in place.
  • Pull the tab upward and remove the secondary hard drive from the computer.

Remove the screw that secure that secondary hard drive in place.

Pull the tab upward and remove the secondary hard drive from the computer.

Step 6

  • Remove the screw that secure secondary hard drive to the bracket.
  • Remove the secondary hard drive from the bracket.

Remove the screw that secure secondary hard drive to the bracket.

Remove the secondary hard drive from the bracket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Johnathan Hammond

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored