Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
2
- Battery
- 1 step
- RAM
- 2 steps
Flags
4
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Precision M6600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Slide the lock key to unlock the battery. Then you can lift the battery from its holder.
Slide the lock key to unlock the battery. Then you can lift the battery from its holder.
1024
Step 2
RAM
- There are two 1.5mm screws that will be taken off using a Phillips #00 screw driver.
There are two 1.5mm screws that will be taken off using a Phillips #00 screw driver.
Step 3
- The RAM is held in place by two prongs. By pulling the two prongs lightly away from the chip the RAM is able to be pulled out.
The RAM is held in place by two prongs. By pulling the two prongs lightly away from the chip the RAM is able to be pulled out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Kaley lindsay
Member since: 03/23/2018
546 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team S8-G3, Valliere Spring 2018
Member of UMass Dartmouth, Team S8-G3, Valliere Spring 2018
UMASSD-VALLIERE-S18S8G3
2 Members
4 Guides authored