Difficulty

Easy

Steps

7

Time Required

                          15 - 30 minutes

Sections

5

  • Battery Cover
  • 1 step
  • Battery
  • 1 step
  • Base Cover
  • 1 step
  • KeyBoard
  • 2 steps
  • Memory Module
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Precision 7710

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery Cover
  • Slide the release latch to unlock the battery cover [1].
  • Slide and lift the battery cover to remove it from the computer [2].

Slide the release latch to unlock the battery cover [1].

Slide and lift the battery cover to remove it from the computer [2].

1024

Step 2

              Battery
  • Slide the release latch to unlock the battery [1].
  • Lift and remove the battery from the computer [2].

Slide the release latch to unlock the battery [1].

Lift and remove the battery from the computer [2].

Step 3

              Base Cover
  • Remove the screws that secure the base cover to the computer [1].
  • Slide and lift the base cover away from the computer [2].

Remove the screws that secure the base cover to the computer [1].

Slide and lift the base cover away from the computer [2].

Step 4

              KeyBoard
  • Lift the tab and disconnect the 4 cables, one of the cables may be obstructed by the HDD, so you will need to unscrew/detatch the HDD tray first [1, 2].
  • Pry the keyboard trim starting from the bottom and work along the top edge and remove it from the computer.

Lift the tab and disconnect the 4 cables, one of the cables may be obstructed by the HDD, so you will need to unscrew/detatch the HDD tray first [1, 2].

Pry the keyboard trim starting from the bottom and work along the top edge and remove it from the computer.

Step 5

  • Remove the screws that secure the keyboard to the computer [1].
  • Lift the front side and slide the keyboard to remove it away from the computer [2, 3].

Remove the screws that secure the keyboard to the computer [1].

Lift the front side and slide the keyboard to remove it away from the computer [2, 3].

Step 6

              Memory Module
  • Pry the retention clips away from the primary memory until it pops up.
  • Lift the primary memory and remove it from the computer.

Pry the retention clips away from the primary memory until it pops up.

Lift the primary memory and remove it from the computer.

Step 7

  • Remove the screw that secures the memory shield to the computer [1].
  • Lift and remove the memory shield from the computer [2].
  • Pry the retention clips away from the memory module until it pops up [3].
  • Lift the memory module and remove it from the computer [4].

Remove the screw that secures the memory shield to the computer [1].

Lift and remove the memory shield from the computer [2].

Pry the retention clips away from the memory module until it pops up [3].

Lift the memory module and remove it from the computer [4].

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Johnathan Hammond

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored