Dell Precision 5570 Ssd Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

• SSD / Hard drive
• 4 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Precision 5570

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Preparation               

• I found the device surface pretty slipery so I would advise something than can both protect and prevent it to move so you can work easily
• Ensure the computer is fully shutdown to prevent any damage or risk
• Gather the screwdriver
• Pick closing box to safely put the screws

I found the device surface pretty slipery so I would advise something than can both protect and prevent it to move so you can work easily

Ensure the computer is fully shutdown to prevent any damage or risk

Gather the screwdriver

Pick closing box to safely put the screws

1024

Step 2

              Remove base cover screw               

• Using the T5 screwdriver remove all the screws
• Note that there is no hidden screws

Using the T5 screwdriver remove all the screws

Note that there is no hidden screws

Step 3

              Remove the base cover               

• This was the hardest part for me
• I used the tool opener tools from the iFixIt kit. Starting to work on the angle near the edge of the base screen and then using the spatula to work all along the base

This was the hardest part for me

I used the tool opener tools from the iFixIt kit. Starting to work on the angle near the edge of the base screen and then using the spatula to work all along the base

Step 4

              Remove the SSD               

• Each SSD is located into a dedicated thermal box between the battery and the RAM
• Each slot is numbered so it will help you getting them in the order you want
• Use M2x4 screwdriver to unscrew the box from the motherboard
• Replace/insert the SSD
• Place the box again and screw it back

Each SSD is located into a dedicated thermal box between the battery and the RAM

Each slot is numbered so it will help you getting them in the order you want

Use M2x4 screwdriver to unscrew the box from the motherboard

Replace/insert the SSD

Place the box again and screw it back

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Speedy panda                     

Member since: 06/26/2022

134 Reputation

                                      1 Guide authored                  



                       Badges:
                       2