Dell Precision 5530 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Battery
4 steps

Flags

BackDell Precision 5530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Prepare your device

Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
Turn off your computer.
Disconnect all network cables from the computer (if available).
Disconnect your computer and all attached devices from their electrical outlets.
Press and hold the power button for few seconds, to ground the system board.

Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.

Turn off your computer.

Disconnect all network cables from the computer (if available).

Disconnect your computer and all attached devices from their electrical outlets.

Press and hold the power button for few seconds, to ground the system board.

1024

Step 2

              Remove the base cover screws

Close the display and turn the computer over.
Turn the system badge flap over and then remove the M2x8.5 screws that secure the base cover to the computer.
Remove the M2x3 T5 screws that secure the base cover to the computer.
Pry the edges of the base cover and lift it to remove it from the computer.

Close the display and turn the computer over.

Turn the system badge flap over and then remove the M2x8.5 screws that secure the base cover to the computer.

Remove the M2x3 T5 screws that secure the base cover to the computer.

Pry the edges of the base cover and lift it to remove it from the computer.

Step 3

              Remove the base cover

Pry the edges of the base cover and lift it to remove it from the computer. Consider using a spudger.

Pry the edges of the base cover and lift it to remove it from the computer. Consider using a spudger.

Step 4

              Remove the battery

Disconnect the battery cable from the system board.
Remove the M2x4 screws that secure the battery to the computer.
Lift the battery off the computer.

Disconnect the battery cable from the system board.

Remove the M2x4 screws that secure the battery to the computer.

Lift the battery off the computer.

To replace the battery & reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Max Kletskov

Member since: 04/22/2020

37,916 Reputation

                                      15 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team