Dell Precision 5520 Memory Module Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 - 20 minutes            

Sections

• Base Cover
• 1 step
• Battery
• 1 step
• Memory Module
• 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Precision 5520

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Base Cover               

• Be sure to power off and unplug your device before you begin your repair.
• Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).
• Pry the edges of the base cover and lift it to remove it from the computer.
• NOTE: Use a Torx #5 screwdriver for the base screws and a Phillips screwdriver for the two M2x8 screws inside the badge flap.

Be sure to power off and unplug your device before you begin your repair.

Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).

Pry the edges of the base cover and lift it to remove it from the computer.

NOTE: Use a Torx #5 screwdriver for the base screws and a Phillips screwdriver for the two M2x8 screws inside the badge flap.

1024

Step 2

              Battery               

• Disconnect the battery cable from the system board [1].
• Remove the seven M2x4 screws that secure the battery to the computer [2].
• Lift the battery off the computer [3].
• Do not apply pressure to the surface of the battery
• Do not bend
• Do not use tools of any kind to pry on or against the battery
• If a battery cannot be removed within the constraints above, please contact Dell technical support

Disconnect the battery cable from the system board [1].

Remove the seven M2x4 screws that secure the battery to the computer [2].

Lift the battery off the computer [3].

Do not apply pressure to the surface of the battery

Do not bend

Do not use tools of any kind to pry on or against the battery

If a battery cannot be removed within the constraints above, please contact Dell technical support

Step 3

              Memory Module               

• Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its connector on the system board [2].

Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its connector on the system board [2].

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Johnathan Hammond                     

Member since: 02/28/2018

44,151 Reputation

                                      408 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored