Dell Precision 5510 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          30 minutes            

Sections

3

• Base Cover
• 2 steps
• Battery
• 3 steps
• Screen
• 6 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Precision 5510

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Cover               

• Open the system badge flap over to reveal the screws underneath (marked 1 on the image).
• Remove the 12 screws that secure the base cover to the computer.

Open the system badge flap over to reveal the screws underneath (marked 1 on the image).

Remove the 12 screws that secure the base cover to the computer.

1024

Step 2

• Pry the edges base cover and lift it to remove it from computer.

Pry the edges base cover and lift it to remove it from computer.

Step 3

              Battery               

• Unplug the connection that links the battery to the computer.

Unplug the connection that links the battery to the computer.

Step 4

• Remove the four 4.0 mm JIS #0 screws surrounding the battery.

Remove the four 4.0 mm JIS #0 screws surrounding the battery.

Step 5

• Carefully remove the battery from the computer.

Carefully remove the battery from the computer.

Step 6

              Screen               

• Remove the six 4.0 mm Phillips #1 screws.

Remove the six 4.0 mm Phillips #1 screws.

Step 7

• Unscrew the one 4.0 mm Phillips #1 screw from the WiFi chip, then remove it.

Unscrew the one 4.0 mm Phillips #1 screw from the WiFi chip, then remove it.

Step 8

• Disconnect the black wire. Use tweezers to help.

Disconnect the black wire. Use tweezers to help.

Step 9

• Disconnect the multi wire. Use tweezers to help.

Disconnect the multi wire. Use tweezers to help.

Step 10

• Remove the 1.0 mm Phillips #1 screw.

Remove the 1.0 mm Phillips #1 screw.

Step 11

• Flip the laptop over, so it is sitting in the normal upright position. Hold onto the screen, and pull the keyboard up and away from the screen.

Flip the laptop over, so it is sitting in the normal upright position. Hold onto the screen, and pull the keyboard up and away from the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Atlanta Phelps                     

Member since: 08/28/2018

400 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       IUPUI, Team S1-G5, Arle Fall 2018                        

                                                  Member of IUPUI, Team S1-G5, Arle Fall 2018 



                    IUPUI-ARLE-F18S1G5                     


                                            3 Members                     


                                            6 Guides authored                     

John Gaines - Oct 9, 2020

Reply

Can I just change the LCD? Or is changing the entire display assembly the only option?